Quality Control in Homeopathic Research

Dr Asha.K  MD(Hom) Pharmacy
Email : ashabelya123@yahoo.co.in

INTRODUCTION  
A. standard
The acceptability of any material in always established by prescribing a standard. It is a numerical value which “Quantify” a parameter and thus denotes the “Quality” and purity of material, thereby enhancing its “Efficacy”.

Any Standard Product Definitely possess certain amount of stability or shelf life.

Stability of a pharmaceutical product is defined as the capability of a particular formulation is a specific container to remain within its

  • Physical
  • Chemical
  • Microbiological
  • Therapeutic
  • Toxicological— specifications for a prescribed period.

The concepts of standardization in the current day practice is emphasized mainly due to the Industrialization of Homoeopathic pharmaceutics so as to meet the global needs and standard for uniformity in procedures, quality, quantification.

Stability
It is defined as the extent to which a product retains, within specified limits and throughout its period of storage and use. (its shelf life) the same properties and characteristics that is possessed at the time of its manufacture.

The 5 types of stability are

Physical    –   The original physical properties including

  •  Appearance
  • Palatability
  • Uniformity
  • Dissolution
  • Suspend ability are maintained  

Chemical  –  Each chemical “Ingredient” retains its chemical  integrity and labeled potency within the specified limits -Uninfluenced by storage conditions

  • Temp
  • Light
  • Humidity 

Microbiological –  Resistance to microbial growth is retained according to specified requirements.

Therapeutic  –Therapeutic effect remains unchanged

Toxicological     –   No significant increase in Toxicity

Chemical stability is very important.

They may be influenced by Storage conditions

  • Temp
  • Light
  • Humidity

Selection of proper CONTAINERS for ‘dispensing’

(ex) glass vs plastic

clear vs amber, opaque cap  liners

Stability / Shelf life / Expiry dating is based on “Reaction Kinetics”.

The study of rate of chemical change is infuenced by conditions of Concentration of reactants

Products
Other chemical species that may be present

By factors such as

  • Solvent
  • Pressure
  • Temperature

The pioneers of R & D wings and Research Institutes are entrusted is STANDARDIZATION works

Aim
The ultimate aim of standardization is to produce  Homoeopathy  drugs that are

  • Highly efficacious
  • Quality
  • Safety  

QUALITY MONITORING APEX BODY
The Homeopathic Pharmacopoeia  Laboratory (HPL) (1975) under the ministry of Health and Family Welfare, Government of India. HPL, Ghaziabad

  • Set up Sept 1975
  • As a Plan Scheme under 5th Plan (1975-80)
  • Subordinate institute of department of ISM & Homeopathy, GOI
  • Recognized by Dept of Science & Technology, GOI as Scientific, Technological and Research Institution
  • Recognized as Central Drugs Laboratory – for testing of Homeopathic drugs (under Rule 3A, under section-6 of D &C Act)
  • Functioning as STANDARD setting –cum-drug testing laboratory at National level 

Legislation
Standards of Homeopathic drugs are covered under

Second schedule of Drugs & Cosmetics Act, 1940 [D&C Act]     (Homeopathic medicines are defined in RULE 2  (dd))

Under item 4A of the second schedule, under section 8 and 16 of D&C Act, 1940.

Standards included in HPI, which include information on Characterization / Identification / Testing of Standards and Preparation of Homoeopathic medicines.

Statutory requirements to be followed by all the manufacturers of drugs for maintenance of quality of Homoeopathic drugs.

HPI
Standards as worked out by laboratory are approved by Homeopathic pharmacopoeia committee  (sept 1982) are published in the form of  Homeopathic Pharmacopoeia India (HPI)

Volumes Year of Publication Monographs
1 1971 180 drugs
2 1974 100 drugs
3 1987 105 drugs
4 1984 107 drugs
5 1986 114 drugs
6 1990 104 drugs
7 1999 105 drugs
8 2000 101 drugs

Total number of monographs in HPI – 916

HPI indicates in the monograph of each drug

  • Details for identification
  • Details for collection
  • Parts to be used
  • Method of preparation
  • Assessment of purity
  • Limits of impurity

It is essential that these instructions be strictly followed to obtain mother tinctures of desired standards.

Quality control is total procedure for providing the standard medicines to the patients.

QC is not only a laboratory procedures, but also the procedures through which a raw material is transformed to a drug and the finished product till it is used by the patient.

One of important function is to establish specifications for raw materials, packing materials, intermediates and finished products to assure the quality.

For the sake of convenience, Quality Control in Homeopathic medicines is discussed, under 3 headings as

  • Quality control
  • Raw materials & vehicles
  • Processing methods     or  “In Process” quality control
  • Finished products

Care should be taken right from the sampling of raw materials®, identification of adulterants, ® comparison with standards and analysed, ®testing of purity, ® manufacturing, ®processing® different methods of preparation, ® utensils, ® machinery, ® manufacturing area, ® workers hygiene and safety, ®monitoring industrial waste, ® analysis of finished products, ® manufacturing area, ® workers hygiene and safety, ®monitoring industrial waste, ® analysis of finished products,  packaging, ® storing, ® manufacturing area, ® workers hygiene and safety, ®monitoring industrial waste, ® analysis of finished products,  ® manufacturing area, ® workers hygiene and safety, ®monitoring industrial waste, ® analysis of finished products, ® manufacturing area, ® workers hygiene and safety, ®monitoring industrial waste, ® analysis of finished products, , ® dispensing, , ® handling and packaging of medicines while dispensing, the shelf in the physicians clinic  ® the patients methods of usage of medicines provided the shelf in the physicians clinic ® ® ® in the patients wardrobe till the patients consume the medicine.

In all these circumstances the quantity of products may decrease at any point along this long way. So to avoid these problems STANDARD OPERATING PROCEDURES  (S.O.P) are to be written and maintained all along the way from the raw materials to Patients room.

For ensuring that no substandard drugs are released to the Market

C.G.M.P – Current Good Manufacturing Practice is adopted in the manufacturing, they are written procedures for manufacturing operations and document is manufacturing area. Also

C.G.L.P – Current Good Laboratory Practices are adopted in the analytical laboratory. These are written procedures for analysis and documentation is analytical laboratory. (What is not recorded is not done)  

Raw materials 

The quality of raw materials are ascertained and standardized referring HPI.

The important raw materials used for manufacturing are

  • Alcohol
  • Lactose
  • Sugar
  • White petroleum jelly
  • Maize starch
  • Coconut oil
  • Wax
  • Minerals
  • Herbs and animals etc 

In process quality control

  • Embraces ‘every step of the preparation’ from raw materials to finished product.
  • It is critical in ensuring the purity and safety of homeopathic medicines.
  • It is mandatory for the manufacturers to have GMP certificate and to follow their guidelines in order to produce quality drugs. 

GMP has two parts

Part – I –  Lays down GMP guidelines

Part –II –  Lays down the machinery, equipment, details about minimum manufacturing premises required for various system of medicines

Schedule M –I, Rule 85-E(2)   

This schedule M-I, rule 85 – E(2) States Good Manufacturing Practices (GMP) and requirements of premises, plants and equipment for manufacture of Homeopathic preparations.

GMP guidelines are designed for the drug manufacturing units to ensure quality, efficacy and safety of their products for the benefit of the consumers.

Standardization of finished goods
Includes (1) mother tinctures, (2) potentised dilutions, (3) Biochemic tablets, (4) triturations (powder), (5) ointments, (6) Oils, (7) Globules, (8) Eye drops, (9) Ear drops.

CONCLUSION
The quality control procedures on raw materials governs the quality control of finished products and its procedures. So only a quality products is sold to market.

For this reason QC of homeopathy medicine prime requisite in the modern developing world.

Government should come forward with an

EXPERT TEAM consisting of

  • Institutionally trained practitioner
  • Medical Research Experts from Various Medical Field
  • Analytical chemist
  • Biochemist
  • Microbiologist
  • Biotechnologists
  • Pharmacologists
  • Botanist
  • Experts for handling equipments
  • Expert for data management
  • Pharmacovigilence etc.      to evolve standardization works

In terms of modernization, industrialization aiming at mass production, great care and caution should be taken that these is no compromise on Hahnemanian Principles, as well as quality of our medicines.

This would be an IDEAL WAY to promote efficacy, quality and safety of the homoepathy medicines and products

1 Comment

  1. Friend,kindly mention the manufacturing and quality aspect of making GLOBULES as they don’t find place in any of the 9 volumes of Homeopathic pharmacopoeia of India

Leave a Reply

Your email address will not be published.


*